Driveways and paths · Essex

Tarmac driveway resurfacing in Pitsea

Planning tarmac resurfacing in Pitsea? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

PITSEA GUIDE£26–£47 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Pitsea?

Guide prices below are for Pitsea, adjusted for the East of England, where surfacing rates run about 5% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£26–£47 per m²
Example: 30 m² drive£870–£1,550
Example: 50 m² drive£1,300–£2,350
Example: 80 m² drive£2,100–£3,800

As a 2026 guide in Pitsea, tarmac resurfacing work runs at about £26–£47 per m² including VAT, so a 80 m² drive is roughly £2,100–£3,800. Guide only; the survey confirms a fixed price.

Layer by layer

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Pitsea

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Pitsea

The key facts for Pitsea. Pitsea is covered on our Essex rounds, 9 miles from Southend-on-Sea.

Postcodes
SS13
Area
Essex
Nearest towns
Basildon (2 miles), South Benfleet (2 miles), Wickford (3 miles), Canvey Island (4 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Basildon, South Benfleet, Wickford, Canvey Island, Stanford-le-Hope.

What we do on tarmac resurfacing

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Cut out and patch failed areas before overlaying
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Pitsea: common questions

Is the survey in Pitsea free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Pitsea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Pitsea postcodes do you cover?

We cover Pitsea including SS13, and nearby Basildon, South Benfleet, Wickford.

What is the price of tarmac resurfacing in Pitsea?

As a 2026 guide in Pitsea, tarmac resurfacing work runs at about £26–£47 per m² including VAT, so a 80 m² drive is roughly £2,100–£3,800. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Pitsea

Tell us what you have in mind for Pitsea and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Pitsea: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price