Tar and chip driveways in Pitsea
For tar and chip driveways in Pitsea, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

What does a tar and chip driveway cost in Pitsea?
Local guide rates for Pitsea (the East of England, about 5% above our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £47–£79 per m² |
| Example: 50 m² drive | £2,350–£3,950 |
| Example: 100 m² drive | £4,700–£7,900 |
| Example: 200 m² drive | £9,000–£14,950 |
As a 2026 guide in Pitsea, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 200 m² drive is roughly £9,000–£14,950. Guide only; the survey confirms a fixed price.
The build-up we price
Do I need permission in Pitsea?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
What is included in a tar and chip driveway?
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Edges set with kerbs, setts or cobbles
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
Pitsea: the local details
What applies in Pitsea. We cover Pitsea by grouping surveys with nearby Essex jobs; Southend-on-Sea is 9 miles away.
- Postcodes
- SS13
- Area
- Essex
- Nearest towns
- Basildon (2 miles), South Benfleet (2 miles), Wickford (3 miles), Canvey Island (4 miles)
- Pricing
- East of England, about 5% above our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Basildon, South Benfleet, Wickford, Canvey Island, Stanford-le-Hope.
Questions about tar and chip driveways in Pitsea
Tar and chip driveway cost in Pitsea: what should I budget?
As a 2026 guide in Pitsea, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 200 m² drive is roughly £9,000–£14,950. Edging, drainage and a dropped kerb are priced separately where needed.
Which Pitsea postcodes do you cover?
We cover Pitsea including SS13, and nearby Basildon, South Benfleet, Wickford.
Will someone visit before I get a fixed price in Pitsea?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long does a tar and chip driveway take in Pitsea?
Often 1–3 days depending on base work. We book Pitsea surveys alongside other jobs in Essex, and give you dates once the specification is agreed.
Also in Pitsea
- Tarmac driveway resurfacing
- Car park surfacing
- Private and access road surfacing
- Red tarmac driveways
- Car park and yard repairs
- Tarmac driveway repairs
- Everything in Pitsea
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Pitsea.
Tar and chip driveways in Pitsea: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED