Tar and chip driveways in Billericay

Tar and chip driveway prices in Billericay

For Billericay, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£47–£79 per m²
Example: 50 m² drive	£2,350–£3,950
Example: 100 m² drive	£4,700–£7,900
Example: 200 m² drive	£9,000–£14,950

As a 2026 guide in Billericay, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 50 m² drive is roughly £2,350–£3,950. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Second coat where a double dressing is specified

Do I need permission in Billericay?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Where we work in and around Billericay

The key facts for Billericay. Billericay is 14 miles from Southend-on-Sea, and we survey there as part of Essex cover.

Postcodes: CM12, CM11, CM4
Area: Essex
Nearest towns: Basildon (4 miles), Wickford (5 miles), Brentwood (5 miles), Pitsea (6 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Basildon, Wickford, Brentwood, Pitsea, Stanford-le-Hope.

Layer by layer

Your questions answered

Do I need permission for a tar and chip driveway in Billericay?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a tar and chip driveway cost in Billericay?

As a 2026 guide in Billericay, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 50 m² drive is roughly £2,350–£3,950. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Billericay?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Billericay?

We cover Billericay including CM12, CM11, CM4, and nearby Basildon, Wickford, Brentwood.

Also in Billericay

Tell us what you have in mind for Billericay and we'll book a survey and put the specification in writing.