Driveways and paths · Lancashire

Tar and chip driveways in Poulton-le-Fylde

For tar and chip driveways in Poulton-le-Fylde, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

POULTON-LE-FYLDE GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Poulton-le-Fylde?

Local guide rates for Poulton-le-Fylde (the North West, about 3% below our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Poulton-le-Fylde, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Guide only; the survey confirms a fixed price.

Layer by layer

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a tar and chip driveway?

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Rules that apply in Poulton-le-Fylde

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Poulton-le-Fylde: the local details

Survey cover and pricing for Poulton-le-Fylde. We cover Poulton-le-Fylde by grouping surveys with nearby Lancashire jobs; Preston is 12 miles away.

Postcodes
FY3
Area
Lancashire
Nearest towns
Blackpool (3 miles), Thornton-Cleveleys (3 miles), Cleveleys (4 miles), Lytham St Annes (6 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Blackpool, Thornton-Cleveleys, Cleveleys, Lytham St Annes, Fleetwood.

Poulton-le-Fylde: common questions

Are there planning or highway rules in Poulton-le-Fylde?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Poulton-le-Fylde?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Poulton-le-Fylde?

We cover Poulton-le-Fylde including FY3, and nearby Blackpool, Thornton-Cleveleys, Cleveleys.

Tar and chip driveway cost in Poulton-le-Fylde: what should I budget?

As a 2026 guide in Poulton-le-Fylde, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Poulton-le-Fylde

Ready for a price in Poulton-le-Fylde? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Poulton-le-Fylde: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price