New tarmac driveways in Poulton-le-Fylde

New tarmac driveway prices in Poulton-le-Fylde

Local guide rates for Poulton-le-Fylde (the North West, about 3% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Poulton-le-Fylde, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

Where we work in and around Poulton-le-Fylde

Poulton-le-Fylde at a glance. Poulton-le-Fylde is covered on our Lancashire rounds, 12 miles from Preston.

Postcodes: FY3
Area: Lancashire
Nearest towns: Blackpool (3 miles), Thornton-Cleveleys (3 miles), Cleveleys (4 miles), Lytham St Annes (6 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Blackpool, Thornton-Cleveleys, Cleveleys, Lytham St Annes, Fleetwood.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint

Do I need permission in Poulton-le-Fylde?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Your questions answered

How long does a new tarmac driveway take in Poulton-le-Fylde?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Poulton-le-Fylde surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.

Do you cover all of Poulton-le-Fylde?

We cover Poulton-le-Fylde including FY3, and nearby Blackpool, Thornton-Cleveleys, Cleveleys.

Will someone visit before I get a fixed price in Poulton-le-Fylde?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Poulton-le-Fylde?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Poulton-le-Fylde

Questions about new tarmac driveways in Poulton-le-Fylde? Call, WhatsApp or use the form, and we'll talk it through.