Tar and chip driveways in Cleveleys

Tar and chip driveway prices in Cleveleys

Local guide rates for Cleveleys (the North West, about 3% below our UK midpoint):

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£73 per m²
Example: 50 m² drive	£2,200–£3,650
Example: 100 m² drive	£4,350–£7,300
Example: 200 m² drive	£8,300–£13,800

As a 2026 guide in Cleveleys, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Guide only; the survey confirms a fixed price.

Rules that apply in Cleveleys

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

The build-up we price

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Chippings spread straight onto the binder
Rolled to bed the stones in
Loose surplus chippings swept up after a few days

Covering Cleveleys

The key facts for Cleveleys. Smaller towns such as Cleveleys are surveyed alongside nearby jobs in Lancashire.

Postcodes: FY5
Area: Lancashire
Nearest towns: Thornton-Cleveleys (1 mile), Fleetwood (4 miles), Poulton-le-Fylde (4 miles), Blackpool (4 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Thornton-Cleveleys, Fleetwood, Poulton-le-Fylde, Blackpool, Lytham St Annes.

Questions about tar and chip driveways in Cleveleys

How much does a tar and chip driveway cost in Cleveleys?

As a 2026 guide in Cleveleys, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Cleveleys property?

Often 1–3 days depending on base work. We book Cleveleys surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.

What approvals apply in Cleveleys?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Cleveleys?

We cover Cleveleys including FY5, and nearby Thornton-Cleveleys, Fleetwood, Poulton-le-Fylde.

Also in Cleveleys

Ready for a price in Cleveleys? Use the guide price tool or send the form, and we'll arrange a visit.