Tar and chip driveways in Blackpool
A good tar and chip driveway in Blackpool looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

Tar and chip driveway prices in Blackpool
For Blackpool, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£73 per m² |
| Example: 50 m² drive | £2,200–£3,650 |
| Example: 100 m² drive | £4,350–£7,300 |
| Example: 200 m² drive | £8,300–£13,800 |
As a 2026 guide in Blackpool, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Guide only; the survey confirms a fixed price.
How it is built
What the price covers
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Edges set with kerbs, setts or cobbles
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
Where we work in and around Blackpool
Survey cover and pricing for Blackpool. We cover Blackpool as part of our regular Lancashire rounds.
- Postcodes
- FY1, FY3, FY4
- Area
- Lancashire
- Nearest towns
- Poulton-le-Fylde (3 miles), Thornton-Cleveleys (4 miles), Cleveleys (4 miles), Lytham St Annes (6 miles)
- Pricing
- North West, about 3% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Poulton-le-Fylde, Thornton-Cleveleys, Cleveleys, Lytham St Annes, Fleetwood.
Planning and kerb rules for Blackpool
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
Questions about tar and chip driveways in Blackpool
Will someone visit before I get a fixed price in Blackpool?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What is the price of a tar and chip driveway in Blackpool?
As a 2026 guide in Blackpool, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Edging, drainage and a dropped kerb are priced separately where needed.
Are there planning or highway rules in Blackpool?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Do you cover all of Blackpool?
We cover Blackpool including FY1, FY3, FY4, and nearby Poulton-le-Fylde, Thornton-Cleveleys, Cleveleys.
Other work in Blackpool
- Tarmac driveway resurfacing
- Car park and yard repairs
- Private and access road surfacing
- Front garden to tarmac driveway
- Permeable tarmac driveways
- New tarmac driveways
- Everything in Blackpool
Ready for a price in Blackpool? Use the guide price tool or send the form, and we'll arrange a visit.
Tar and chip driveways in Blackpool: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED