Tar and chip driveways in Abertillery

How much should I budget in Abertillery?

For Abertillery, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£71 per m²
Example: 50 m² drive	£2,150–£3,550
Example: 100 m² drive	£4,300–£7,100
Example: 200 m² drive	£8,100–£13,550

As a 2026 guide in Abertillery, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 200 m² drive is roughly £8,100–£13,550. Guide only; the survey confirms a fixed price.

Do I need permission in Abertillery?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

Layer by layer

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in
Second coat where a double dressing is specified

Abertillery: the local details

What applies in Abertillery. Smaller towns such as Abertillery are surveyed alongside nearby jobs in Gwent.

Postcodes: NP13
Area: Gwent
Nearest towns: Pontypool (4 miles), Ebbw Vale (5 miles), Brynmawr (5 miles), Blackwood (5 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

We also cover nearby Pontypool, Ebbw Vale, Brynmawr, Blackwood, Bargoed.

Abertillery: common questions

How much does a tar and chip driveway cost in Abertillery?

As a 2026 guide in Abertillery, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 200 m² drive is roughly £8,100–£13,550. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Abertillery property?

Often 1–3 days depending on base work. We book Abertillery surveys alongside other jobs in Gwent, and give you dates once the specification is agreed.

Are there planning or highway rules in Abertillery?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Will someone visit before I get a fixed price in Abertillery?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Abertillery

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Abertillery.