Driveways and paths · Mid Glamorgan

Tar and chip driveways in Bargoed

For tar and chip driveways in Bargoed, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

BARGOED GUIDE£43–£71 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Bargoed?

For Bargoed, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£71 per m²
Example: 50 m² drive£2,150–£3,550
Example: 100 m² drive£4,300–£7,100
Example: 200 m² drive£8,100–£13,550

As a 2026 guide in Bargoed, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,100. Guide only; the survey confirms a fixed price.

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Bargoed

Bargoed at a glance. We cover Bargoed by grouping surveys with nearby Mid Glamorgan jobs; Rhondda is 9 miles away.

Postcodes
CF81, NP24
Area
Mid Glamorgan
Nearest towns
Blackwood (2 miles), Treharris (3 miles), Abertillery (5 miles), Tredegar (6 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

We also cover nearby Blackwood, Treharris, Abertillery, Tredegar, Mountain Ash.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Second coat where a double dressing is specified

Rules that apply in Bargoed

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. If the job needs a dropped kerb, the council as highway authority approves it before any work on the footway.

Bargoed: common questions

What is the price of a tar and chip driveway in Bargoed?

As a 2026 guide in Bargoed, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,100. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Bargoed?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Can I get a free survey in Bargoed?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my Bargoed property?

Often 1–3 days depending on base work. We book Bargoed surveys alongside other jobs in Mid Glamorgan, and give you dates once the specification is agreed.

Other work in Bargoed

Questions about tar and chip driveways in Bargoed? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Bargoed: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price