New tarmac driveways in Abertillery

What does a new tarmac driveway cost in Abertillery?

Guide prices below are for Abertillery, adjusted for Wales, where surfacing rates run about 5% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£57–£90 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,850–£4,500
Example: 80 m² drive	£4,550–£7,200

As a 2026 guide in Abertillery, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 50 m² drive is roughly £2,850–£4,500. Guide only; the survey confirms a fixed price.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Planning and kerb rules for Abertillery

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

Where we work in and around Abertillery

What applies in Abertillery. Abertillery is covered on our Gwent rounds, 11 miles from Newport, Gwent.

Postcodes: NP13
Area: Gwent
Nearest towns: Pontypool (4 miles), Ebbw Vale (5 miles), Brynmawr (5 miles), Blackwood (5 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

We also cover nearby Pontypool, Ebbw Vale, Brynmawr, Blackwood, Bargoed.

Abertillery: common questions

New tarmac driveway cost in Abertillery: what should I budget?

As a 2026 guide in Abertillery, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 50 m² drive is roughly £2,850–£4,500. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a new tarmac driveway take in Abertillery?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Abertillery surveys alongside other jobs in Gwent, and give you dates once the specification is agreed.

Can I get a free survey in Abertillery?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a new tarmac driveway in Abertillery?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

More we do in Abertillery

Questions about new tarmac driveways in Abertillery? Call, WhatsApp or use the form, and we'll talk it through.