New tarmac driveways in Ebbw Vale

How much should I budget in Ebbw Vale?

For Ebbw Vale, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£57–£90 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,850–£4,500
Example: 80 m² drive	£4,550–£7,200

As a 2026 guide in Ebbw Vale, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 80 m² drive is roughly £4,550–£7,200. Guide only; the survey confirms a fixed price.

The build-up we price

Do I need permission in Ebbw Vale?

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. Any new or widened crossing over the pavement needs approval from the council as highway authority.

Covering Ebbw Vale

What applies in Ebbw Vale. Ebbw Vale is 16 miles from Newport, Gwent, and we survey there as part of Gwent cover.

Postcodes: NP23
Area: Gwent
Nearest towns: Tredegar (2 miles), Brynmawr (2 miles), Abertillery (5 miles), Bargoed (7 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

The same service is available in Tredegar, Brynmawr, Abertillery, Bargoed, Merthyr Tydfil.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Ebbw Vale: common questions

How quickly can work start in Ebbw Vale?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ebbw Vale surveys alongside other jobs in Gwent, and give you dates once the specification is agreed.

Which Ebbw Vale postcodes do you cover?

We cover Ebbw Vale including NP23, and nearby Tredegar, Brynmawr, Abertillery.

Is the survey in Ebbw Vale free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a new tarmac driveway in Ebbw Vale?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Also in Ebbw Vale

Ready for a price in Ebbw Vale? Use the guide price tool or send the form, and we'll arrange a visit.