Driveways and paths · Gwent

Red tarmac driveways in Abertillery

Red tarmac driveways in Abertillery start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

ABERTILLERY GUIDE£71–£109 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Abertillery?

Local guide rates for Abertillery (Wales, about 5% below our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£71–£109 per m²
Example: 30 m² drive£2,350–£3,600
Example: 50 m² drive£3,550–£5,450
Example: 80 m² drive£5,700–£8,750

As a 2026 guide in Abertillery, red tarmac driveway work runs at about £71–£109 per m² including VAT, so a 80 m² drive is roughly £5,700–£8,750. Guide only; the survey confirms a fixed price.

What the price covers

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Rules that apply in Abertillery

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Abertillery

The key facts for Abertillery. We cover Abertillery by grouping surveys with nearby Gwent jobs; Newport, Gwent is 11 miles away.

Postcodes
NP13
Area
Gwent
Nearest towns
Pontypool (4 miles), Ebbw Vale (5 miles), Brynmawr (5 miles), Blackwood (5 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

We also cover nearby Pontypool, Ebbw Vale, Brynmawr, Blackwood, Bargoed.

Abertillery: common questions

How quickly can work start in Abertillery?

Usually 2–4 working days. We book Abertillery surveys alongside other jobs in Gwent, and give you dates once the specification is agreed.

Which Abertillery postcodes do you cover?

We cover Abertillery including NP13, and nearby Pontypool, Ebbw Vale, Brynmawr.

What approvals apply in Abertillery?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

What is the price of a red tarmac driveway in Abertillery?

As a 2026 guide in Abertillery, red tarmac driveway work runs at about £71–£109 per m² including VAT, so a 80 m² drive is roughly £5,700–£8,750. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Abertillery

Tell us what you have in mind for Abertillery and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Abertillery: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price