Driveways and paths · Nottinghamshire

Permeable tarmac driveways in Eastwood

Planning a permeable tarmac driveway in Eastwood? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

EASTWOOD GUIDE£78–£122 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

What does a permeable tarmac driveway cost in Eastwood?

Guide prices below are for Eastwood, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£78–£122 per m²
Example: 30 m² drive£2,600–£4,050
Example: 50 m² drive£3,900–£6,100
Example: 80 m² drive£6,250–£9,800

As a 2026 guide in Eastwood, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Guide only; the survey confirms a fixed price.

What we do on a permeable tarmac driveway

Open-graded porous asphalt on a deep permeable stone base, so rain soaks through on site.

  • Dig out deeper than a standard drive to fit the storage layer
  • Open-graded permeable sub-base, often Type 3 or 4/20 stone
  • Porous asphalt binder and surface courses
  • Overflow to a soakaway or border on slow-draining ground
  • Edge restraint that does not block the flow

Covering Eastwood

The key facts for Eastwood. Smaller towns such as Eastwood are surveyed alongside nearby jobs in Nottinghamshire.

Postcodes
NG16
Area
Nottinghamshire
Nearest towns
Ilkeston (2 miles), Heanor (2 miles), Ripley (5 miles), Hucknall (5 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Ilkeston, Heanor, Ripley, Hucknall, Arnold.

Rules that apply in Eastwood

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Layer by layer

Surface courseporous asphalt, open-gradedBinder courseporous asphalt baseStorage layeropen-graded Type 3 or 4/20 stone, depth to suitFormationgeotextile on the subsoilINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about permeable tarmac driveways in Eastwood

How long does a permeable tarmac driveway take in Eastwood?

Usually 3–5 working days. We book Eastwood surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.

Do I need permission for a permeable tarmac driveway in Eastwood?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a permeable tarmac driveway in Eastwood?

As a 2026 guide in Eastwood, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Eastwood free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Eastwood

Questions about permeable tarmac driveways in Eastwood? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Permeable tarmac driveways in Eastwood: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price