Driveways and paths · Nottinghamshire

Permeable tarmac driveways in Hucknall

For permeable tarmac driveways in Hucknall, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

HUCKNALL GUIDE£78–£122 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

How much should I budget in Hucknall?

For Hucknall, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£78–£122 per m²
Example: 30 m² drive£2,600–£4,050
Example: 50 m² drive£3,900–£6,100
Example: 80 m² drive£6,250–£9,800

As a 2026 guide in Hucknall, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,100. Guide only; the survey confirms a fixed price.

Layer by layer

Surface courseporous asphalt, open-gradedBinder courseporous asphalt baseStorage layeropen-graded Type 3 or 4/20 stone, depth to suitFormationgeotextile on the subsoilINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a permeable tarmac driveway?

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

  • Dig out deeper than a standard drive to fit the storage layer
  • Geotextile separating layer on the formation
  • Open-graded permeable sub-base, often Type 3 or 4/20 stone
  • Overflow to a soakaway or border on slow-draining ground
  • Edge restraint that does not block the flow

Hucknall: the local details

The key facts for Hucknall. Smaller towns such as Hucknall are surveyed alongside nearby jobs in Nottinghamshire.

Postcodes
NG15, NG6
Area
Nottinghamshire
Nearest towns
Arnold (4 miles), Eastwood (5 miles), Kirkby-in-Ashfield (5 miles), Nottingham (6 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Arnold, Eastwood, Kirkby-in-Ashfield, Nottingham, Ilkeston.

Rules that apply in Hucknall

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Hucknall: common questions

Do you cover all of Hucknall?

We cover Hucknall including NG15, NG6, and nearby Arnold, Eastwood, Kirkby-in-Ashfield.

How much does a permeable tarmac driveway cost in Hucknall?

As a 2026 guide in Hucknall, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,100. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a permeable tarmac driveway in Hucknall?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a permeable tarmac driveway take in Hucknall?

Usually 3–5 working days. We book Hucknall surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.

More we do in Hucknall

Ready for a price in Hucknall? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Permeable tarmac driveways in Hucknall: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price