Permeable tarmac driveways in Ilkeston

What does a permeable tarmac driveway cost in Ilkeston?

Guide prices below are for Ilkeston, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£78–£122 per m²
Example: 30 m² drive	£2,600–£4,050
Example: 50 m² drive	£3,900–£6,100
Example: 80 m² drive	£6,250–£9,800

As a 2026 guide in Ilkeston, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Ilkeston

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Layer by layer

Where we work in and around Ilkeston

Ilkeston at a glance. Ilkeston is 8 miles from Derby, and we survey there as part of Derbyshire cover.

Postcodes: DE7
Area: Derbyshire
Nearest towns: Eastwood (2 miles), Heanor (4 miles), Long Eaton (5 miles), Ripley (6 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Eastwood, Heanor, Long Eaton, Ripley, Hucknall.

What is included in a permeable tarmac driveway?

Open-graded porous asphalt on a deep permeable stone base, so rain soaks through on site.

Ground check: how fast does the soil drain?
Dig out deeper than a standard drive to fit the storage layer
Geotextile separating layer on the formation
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Edge restraint that does not block the flow

Ilkeston: common questions

What approvals apply in Ilkeston?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Ilkeston property?

Usually 3–5 working days. We book Ilkeston surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

What is the price of a permeable tarmac driveway in Ilkeston?

As a 2026 guide in Ilkeston, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Ilkeston?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Ilkeston

Ready for a price in Ilkeston? Use the guide price tool or send the form, and we'll arrange a visit.