Driveways and paths · Derbyshire

New tarmac driveways in Ilkeston

Every new tarmac driveway we price in Ilkeston comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

ILKESTON GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Ilkeston?

Local guide rates for Ilkeston (the East Midlands, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Ilkeston, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Do I need permission in Ilkeston?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Ilkeston: the local details

What applies in Ilkeston. We reach Ilkeston on our Derbyshire survey days; Derby is 8 miles away.

Postcodes
DE7
Area
Derbyshire
Nearest towns
Eastwood (2 miles), Heanor (4 miles), Long Eaton (5 miles), Ripley (6 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Eastwood, Heanor, Long Eaton, Ripley, Hucknall.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Ilkeston

Do you work in my part of Ilkeston?

We cover Ilkeston including DE7, and nearby Eastwood, Heanor, Long Eaton.

Can I get a free survey in Ilkeston?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Ilkeston?

As a 2026 guide in Ilkeston, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Ilkeston?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ilkeston surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

More we do in Ilkeston

Tell us what you have in mind for Ilkeston and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Ilkeston: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price