New tarmac driveways in Eastwood
For new tarmac driveways in Eastwood, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

New tarmac driveway prices in Eastwood
These Eastwood guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £59–£93 per m² |
| Example: 30 m² drive | £1,950–£3,050 |
| Example: 50 m² drive | £2,950–£4,650 |
| Example: 80 m² drive | £4,700–£7,450 |
As a 2026 guide in Eastwood, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.
What the price covers
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Dig to formation level, usually around 230–250 mm below finished height
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Covering Eastwood
Eastwood at a glance. Smaller towns such as Eastwood are surveyed alongside nearby jobs in Nottinghamshire.
- Postcodes
- NG16
- Area
- Nottinghamshire
- Nearest towns
- Ilkeston (2 miles), Heanor (2 miles), Ripley (5 miles), Hucknall (5 miles)
- Pricing
- East Midlands, about 2% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Eastwood: Ilkeston, Heanor, Ripley, Hucknall, Arnold.
Planning and kerb rules for Eastwood
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Questions about new tarmac driveways in Eastwood
How long does a new tarmac driveway take in Eastwood?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Eastwood surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.
Can I get a free survey in Eastwood?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which Eastwood postcodes do you cover?
We cover Eastwood including NG16, and nearby Ilkeston, Heanor, Ripley.
Do I need permission for a new tarmac driveway in Eastwood?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Other work in Eastwood
- Car park surfacing
- Permeable tarmac driveways
- Tarmac driveway resurfacing
- Front garden to tarmac driveway
- Tarmac paths and footpaths
- Private and access road surfacing
- Everything in Eastwood
Tell us what you have in mind for Eastwood and we'll book a survey and put the specification in writing.
New tarmac driveways in Eastwood: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED