Driveways and paths · Nottinghamshire

New tarmac driveways in Hucknall

A good new tarmac driveway in Hucknall looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

HUCKNALL GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Hucknall?

For Hucknall, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Hucknall, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Hucknall?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Covering Hucknall

The key facts for Hucknall. We cover Hucknall by grouping surveys with nearby Nottinghamshire jobs; Nottingham is 6 miles away.

Postcodes
NG15, NG6
Area
Nottinghamshire
Nearest towns
Arnold (4 miles), Eastwood (5 miles), Kirkby-in-Ashfield (5 miles), Nottingham (6 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Arnold, Eastwood, Kirkby-in-Ashfield, Nottingham, Ilkeston.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Hucknall: common questions

New tarmac driveway cost in Hucknall: what should I budget?

As a 2026 guide in Hucknall, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Hucknall?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Hucknall?

We cover Hucknall including NG15, NG6, and nearby Arnold, Eastwood, Kirkby-in-Ashfield.

How long does a new tarmac driveway take in Hucknall?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Hucknall surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.

Also in Hucknall

Tell us what you have in mind for Hucknall and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Hucknall: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price