New tarmac driveways in Blaydon-on-Tyne
New tarmac driveways in Blaydon-on-Tyne start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

How much should I budget in Blaydon-on-Tyne?
Guide prices below are for Blaydon-on-Tyne, adjusted for the North East, where surfacing rates run about 7% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £56–£88 per m² |
| Example: 30 m² drive | £1,850–£2,900 |
| Example: 50 m² drive | £2,800–£4,400 |
| Example: 80 m² drive | £4,450–£7,050 |
As a 2026 guide in Blaydon-on-Tyne, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Guide only; the survey confirms a fixed price.
Rules that apply in Blaydon-on-Tyne
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Where we work in and around Blaydon-on-Tyne
Survey cover and pricing for Blaydon-on-Tyne. Blaydon-on-Tyne is covered on our Tyne and Wear rounds, 4 miles from Newcastle upon Tyne.
- Postcodes
- NE21, NE39
- Area
- Tyne and Wear
- Nearest towns
- Whickham (2 miles), Newburn (2 miles), Newcastle upon Tyne (4 miles), Gateshead (4 miles)
- Pricing
- North East, about 7% below our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Whickham, Newburn, Newcastle upon Tyne, Gateshead, Gosforth.
What the price covers
Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.
- Dig to formation level, usually around 230–250 mm below finished height
- Geotextile membrane where the ground is soft or clay
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Layer by layer
Questions about new tarmac driveways in Blaydon-on-Tyne
New tarmac driveway cost in Blaydon-on-Tyne: what should I budget?
As a 2026 guide in Blaydon-on-Tyne, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Edging, drainage and a dropped kerb are priced separately where needed.
Do I need permission for a new tarmac driveway in Blaydon-on-Tyne?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long does a new tarmac driveway take in Blaydon-on-Tyne?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Blaydon-on-Tyne surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.
Do you work in my part of Blaydon-on-Tyne?
We cover Blaydon-on-Tyne including NE21, NE39, and nearby Whickham, Newburn, Newcastle upon Tyne.
Also in Blaydon-on-Tyne
- Tar and chip driveways
- Tarmac driveway resurfacing
- Front garden to tarmac driveway
- Car park and yard repairs
- Tarmac paths and footpaths
- Car park resurfacing
- Everything in Blaydon-on-Tyne
Tell us what you have in mind for Blaydon-on-Tyne and we'll book a survey and put the specification in writing.
New tarmac driveways in Blaydon-on-Tyne: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED