Driveways and paths · Lincolnshire

New tarmac driveways in Stamford

We survey and price new tarmac driveways across Stamford and the PE9 postcodes, with every layer and its depth written into the quote.

STAMFORD GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Stamford?

These Stamford guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Stamford, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Stamford

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Covering Stamford

What applies in Stamford. Smaller towns such as Stamford are surveyed alongside nearby jobs in Lincolnshire.

Postcodes
PE9
Area
Lincolnshire
Nearest towns
Oakham (11 miles), Peterborough (11 miles), Spalding (17 miles), Grantham (19 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Close to Stamford: Oakham, Peterborough, Spalding, Grantham, Sleaford.

Stamford: common questions

What is the price of a new tarmac driveway in Stamford?

As a 2026 guide in Stamford, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Stamford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a new tarmac driveway take in Stamford?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Stamford surveys alongside other jobs in Lincolnshire, and give you dates once the specification is agreed.

Which Stamford postcodes do you cover?

We cover Stamford including PE9, and nearby Oakham, Peterborough, Spalding.

More we do in Stamford

Ready for a price in Stamford? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Stamford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price