New tarmac driveways in Oakham

What does a new tarmac driveway cost in Oakham?

Local guide rates for Oakham (the East Midlands, about 2% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Oakham, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Oakham

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Oakham

Survey cover and pricing for Oakham. Oakham is covered on our Rutland rounds, under a mile from Oakham.

Postcodes: LE15
Area: Rutland
Nearest towns: Melton Mowbray (9 miles), Stamford (11 miles), Corby (12 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Melton Mowbray, Stamford, Corby.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Oakham

What is the price of a new tarmac driveway in Oakham?

As a 2026 guide in Oakham, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a new tarmac driveway take in Oakham?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Oakham surveys alongside other jobs in Rutland, and give you dates once the specification is agreed.

Which Oakham postcodes do you cover?

We cover Oakham including LE15, and nearby Melton Mowbray, Stamford, Corby.

Are there planning or highway rules in Oakham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Oakham

Tell us what you have in mind for Oakham and we'll book a survey and put the specification in writing.