Driveways and paths · Lincolnshire

New tarmac driveways in Spalding

Every new tarmac driveway we price in Spalding comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

SPALDING GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Spalding

Guide prices below are for Spalding, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Spalding, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Guide only; the survey confirms a fixed price.

Where we work in and around Spalding

What applies in Spalding. Spalding sits 34 miles from Lincoln, within our regular Lincolnshire cover.

Postcodes
PE11
Area
Lincolnshire
Nearest towns
Boston (14 miles), Stamford (17 miles), Sleaford (18 miles), Grantham (22 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Boston, Stamford, Sleaford, Grantham.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Do I need permission in Spalding?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Spalding: common questions

How much does a new tarmac driveway cost in Spalding?

As a 2026 guide in Spalding, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 50 m² drive is roughly £2,950–£4,650. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Spalding?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Spalding postcodes do you cover?

We cover Spalding including PE11, and nearby Boston, Stamford, Sleaford.

How long does a new tarmac driveway take in Spalding?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Spalding surveys alongside other jobs in Lincolnshire, and give you dates once the specification is agreed.

More we do in Spalding

Ready for a price in Spalding? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Spalding: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price