Tar and chip driveways in Stamford

How much should I budget in Stamford?

These Stamford guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£74 per m²
Example: 50 m² drive	£2,200–£3,700
Example: 100 m² drive	£4,400–£7,350
Example: 200 m² drive	£8,400–£13,950

As a 2026 guide in Stamford, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Guide only; the survey confirms a fixed price.

How it is built

Rules that apply in Stamford

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Rolled to bed the stones in
Second coat where a double dressing is specified

Covering Stamford

Survey cover and pricing for Stamford. Stamford is covered on our Lincolnshire rounds, 40 miles from Lincoln.

Postcodes: PE9
Area: Lincolnshire
Nearest towns: Oakham (11 miles), Peterborough (11 miles), Spalding (17 miles), Grantham (19 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Oakham, Peterborough, Spalding, Grantham, Sleaford.

Your questions answered

Is the survey in Stamford free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a tar and chip driveway in Stamford?

As a 2026 guide in Stamford, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 100 m² drive is roughly £4,400–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Stamford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Stamford property?

Often 1–3 days depending on base work. We book Stamford surveys alongside other jobs in Lincolnshire, and give you dates once the specification is agreed.

Other work in Stamford

Questions about tar and chip driveways in Stamford? Call, WhatsApp or use the form, and we'll talk it through.