Driveways and paths · South Yorkshire

Tarmac paths and footpaths in Chapeltown

For tarmac paths in Chapeltown, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

CHAPELTOWN GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Chapeltown

These Chapeltown guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Chapeltown, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Planning and kerb rules for Chapeltown

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Where we work in and around Chapeltown

What applies in Chapeltown. We cover Chapeltown by grouping surveys with nearby South Yorkshire jobs; Sheffield is 6 miles away.

Postcodes
S35
Area
South Yorkshire
Nearest towns
Hoyland (3 miles), Wombwell (5 miles), Rawmarsh (5 miles), Rotherham (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Hoyland, Wombwell, Rawmarsh, Rotherham, Sheffield.

Chapeltown: common questions

Can I get a free survey in Chapeltown?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tarmac path take in Chapeltown?

Often 1–2 days. We book Chapeltown surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Chapeltown?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tarmac path cost in Chapeltown: what should I budget?

As a 2026 guide in Chapeltown, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Chapeltown

Tell us what you have in mind for Chapeltown and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Chapeltown: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price