Driveways and paths · South Yorkshire

Red tarmac driveways in Chapeltown

Homeowners in Chapeltown ask us about red tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

CHAPELTOWN GUIDE£72–£110 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Chapeltown

Local guide rates for Chapeltown (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£72–£110 per m²
Example: 30 m² drive£2,400–£3,650
Example: 50 m² drive£3,600–£5,500
Example: 80 m² drive£5,750–£8,850

As a 2026 guide in Chapeltown, red tarmac driveway work runs at about £72–£110 per m² including VAT, so a 80 m² drive is roughly £5,750–£8,850. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Chapeltown

What applies in Chapeltown. Chapeltown is covered on our South Yorkshire rounds, 6 miles from Sheffield.

Postcodes
S35
Area
South Yorkshire
Nearest towns
Hoyland (3 miles), Wombwell (5 miles), Rawmarsh (5 miles), Rotherham (5 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Hoyland, Wombwell, Rawmarsh, Rotherham, Sheffield.

What is included in a red tarmac driveway?

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Planning and kerb rules for Chapeltown

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Chapeltown: common questions

Are there planning or highway rules in Chapeltown?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Chapeltown property?

Usually 2–4 working days. We book Chapeltown surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Can I get a free survey in Chapeltown?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Chapeltown postcodes do you cover?

We cover Chapeltown including S35, and nearby Hoyland, Wombwell, Rawmarsh.

More we do in Chapeltown

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Chapeltown.

Free survey for new surfacing

Red tarmac driveways in Chapeltown: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price