Driveways and paths · Lancashire

Tarmac paths and footpaths in Rawtenstall

Homeowners in Rawtenstall ask us about tarmac paths for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

RAWTENSTALL GUIDE£53–£87 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Rawtenstall?

These Rawtenstall guide prices reflect rates in the North West, about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£87 per m²
Example: 10 m² path£640–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,150–£3,500

As a 2026 guide in Rawtenstall, tarmac path work runs at about £53–£87 per m² including VAT, so a 40 m² path is roughly £2,150–£3,500. Guide only; the survey confirms a fixed price.

Where we work in and around Rawtenstall

The key facts for Rawtenstall. Rawtenstall is covered on our Lancashire rounds, 18 miles from Preston.

Postcodes
BB4, OL13
Area
Lancashire
Nearest towns
Haslingden (2 miles), Ramsbottom (4 miles), Accrington (5 miles), Bury (7 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Haslingden, Ramsbottom, Accrington, Bury, Burnley.

Planning and kerb rules for Rawtenstall

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a tarmac path

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled

Rawtenstall: common questions

Is the survey in Rawtenstall free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Rawtenstall?

We cover Rawtenstall including BB4, OL13, and nearby Haslingden, Ramsbottom, Accrington.

How much does a tarmac path cost in Rawtenstall?

As a 2026 guide in Rawtenstall, tarmac path work runs at about £53–£87 per m² including VAT, so a 40 m² path is roughly £2,150–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Rawtenstall?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Rawtenstall

Tell us what you have in mind for Rawtenstall and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Rawtenstall: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price