Tarmac paths and footpaths in Accrington
For tarmac paths in Accrington, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

What does a tarmac path cost in Accrington?
Local guide rates for Accrington (the North West, about 3% below our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £53–£87 per m² |
| Example: 10 m² path | £640–£1,050 |
| Example: 20 m² path | £1,150–£1,900 |
| Example: 40 m² path | £2,150–£3,500 |
As a 2026 guide in Accrington, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Guide only; the survey confirms a fixed price.
Rules that apply in Accrington
Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.
What is included in a tarmac path?
A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.
- Path set out to the line and width you want
- Excavation to about 150–180 mm with spoil removed
- Timber, kerb or block edging on both sides
- Binder and surface course laid hot by hand and rolled
- Gentle cross-fall so water runs off to the border
Covering Accrington
Accrington at a glance. Accrington sits 14 miles from Preston, within our regular Lancashire cover.
- Postcodes
- BB5, BB6
- Area
- Lancashire
- Nearest towns
- Haslingden (4 miles), Rawtenstall (5 miles), Blackburn (5 miles), Darwen (6 miles)
- Pricing
- North West, about 3% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Accrington: Haslingden, Rawtenstall, Blackburn, Darwen, Burnley.
Accrington: common questions
How much does a tarmac path cost in Accrington?
As a 2026 guide in Accrington, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.
What approvals apply in Accrington?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Can I get a free survey in Accrington?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which Accrington postcodes do you cover?
We cover Accrington including BB5, BB6, and nearby Haslingden, Rawtenstall, Blackburn.
More we do in Accrington
- Tarmac driveway repairs
- Permeable tarmac driveways
- New tarmac driveways
- Car park surfacing
- Private and access road surfacing
- Tar and chip driveways
- Everything in Accrington
Tell us what you have in mind for Accrington and we'll book a survey and put the specification in writing.
Tarmac paths and footpaths in Accrington: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED