Driveways and paths · Lancashire

Tar and chip driveways in Accrington

Every tar and chip driveway we price in Accrington comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

ACCRINGTON GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Accrington

For Accrington, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Accrington, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Guide only; the survey confirms a fixed price.

Do I need permission in Accrington?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Accrington

The key facts for Accrington. We reach Accrington on our Lancashire survey days; Preston is 14 miles away.

Postcodes
BB5, BB6
Area
Lancashire
Nearest towns
Haslingden (4 miles), Rawtenstall (5 miles), Blackburn (5 miles), Darwen (6 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Haslingden, Rawtenstall, Blackburn, Darwen, Burnley.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Second coat where a double dressing is specified

Questions about tar and chip driveways in Accrington

Is the survey in Accrington free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Accrington postcodes do you cover?

We cover Accrington including BB5, BB6, and nearby Haslingden, Rawtenstall, Blackburn.

What is the price of a tar and chip driveway in Accrington?

As a 2026 guide in Accrington, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 100 m² drive is roughly £4,350–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Accrington?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Accrington

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Accrington.

Free survey for new surfacing

Tar and chip driveways in Accrington: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price