Driveways and paths · Greater Manchester

Tarmac paths and footpaths in Ramsbottom

If you are weighing up tarmac paths in Ramsbottom, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

RAMSBOTTOM GUIDE£53–£87 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Ramsbottom?

For Ramsbottom, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£87 per m²
Example: 10 m² path£640–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,150–£3,500

As a 2026 guide in Ramsbottom, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Guide only; the survey confirms a fixed price.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Ramsbottom

Survey cover and pricing for Ramsbottom. Ramsbottom is covered on our Greater Manchester rounds, 12 miles from Manchester.

Postcodes
BL0
Area
Greater Manchester
Nearest towns
Bury (3 miles), Haslingden (4 miles), Rawtenstall (4 miles), Heywood (6 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bury, Haslingden, Rawtenstall, Heywood, Radcliffe.

Planning and kerb rules for Ramsbottom

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Your questions answered

Do you work in my part of Ramsbottom?

We cover Ramsbottom including BL0, and nearby Bury, Haslingden, Rawtenstall.

What approvals apply in Ramsbottom?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a tarmac path cost in Ramsbottom?

As a 2026 guide in Ramsbottom, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Ramsbottom free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Ramsbottom

Ready for a price in Ramsbottom? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Ramsbottom: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price