Tarmac paths and footpaths in Ryde

Tarmac path prices in Ryde

These Ryde guide prices reflect rates in the South East, including a travel and haulage allowance because work here is by arrangement.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£67–£109 per m²
Example: 10 m² path	£800–£1,300
Example: 20 m² path	£1,450–£2,400
Example: 40 m² path	£2,650–£4,350

As a 2026 guide in Ryde, tarmac path work runs at about £67–£109 per m² including VAT, so a 10 m² path is roughly £800–£1,300. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Ryde

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

How it is built

What is included in a tarmac path?

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

Path set out to the line and width you want
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Where we work in and around Ryde

Ryde at a glance. Ryde is covered by arrangement: we group work in the area to keep travel and haulage costs fair, and confirm any extra cost before you book.

Postcodes: PO33, PO34
Area: Isle of Wight
Nearest towns: Sandown (5 miles), Newport (Isle of Wight) (6 miles), Cowes (6 miles)
Pricing: South East rates plus a travel allowance (by arrangement)
Cover: By arrangement
Kerb approvals: The highway authority

The same service is available in Sandown, Newport (Isle of Wight), Cowes.

Questions about tarmac paths in Ryde

Which Ryde postcodes do you cover?

We cover Ryde including PO33, PO34, and nearby Sandown, Newport (Isle of Wight), Cowes. Work here is by arrangement.

How much does a tarmac path cost in Ryde?

As a 2026 guide in Ryde, tarmac path work runs at about £67–£109 per m² including VAT, so a 10 m² path is roughly £800–£1,300. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Ryde?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Ryde?

Ryde is covered by arrangement. We confirm any travel cost before booking the survey.

Also in Ryde

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ryde.