New tarmac driveways in Ryde

How much should I budget in Ryde?

Local guide rates for Ryde (the South East, including a travel and haulage allowance because work here is by arrangement):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£73–£115 per m²
Example: 30 m² drive	£2,400–£3,800
Example: 50 m² drive	£3,650–£5,750
Example: 80 m² drive	£5,800–£9,200

As a 2026 guide in Ryde, new tarmac driveway work runs at about £73–£115 per m² including VAT, so a 50 m² drive is roughly £3,650–£5,750. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Ryde

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Ryde: the local details

Ryde at a glance. Ryde is covered by arrangement: we group work in the area to keep travel and haulage costs fair, and confirm any extra cost before you book.

Postcodes: PO33, PO34
Area: Isle of Wight
Nearest towns: Sandown (5 miles), Newport (Isle of Wight) (6 miles), Cowes (6 miles)
Pricing: South East rates plus a travel allowance (by arrangement)
Cover: By arrangement
Kerb approvals: The highway authority

Close to Ryde: Sandown, Newport (Isle of Wight), Cowes.

Ryde: common questions

Which Ryde postcodes do you cover?

We cover Ryde including PO33, PO34, and nearby Sandown, Newport (Isle of Wight), Cowes. Work here is by arrangement.

Is the survey in Ryde free?

Ryde is covered by arrangement. We confirm any travel cost before booking the survey.

How quickly can work start in Ryde?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ryde surveys alongside other jobs on the Isle of Wight, and give you dates once the specification is agreed.

New tarmac driveway cost in Ryde: what should I budget?

As a 2026 guide in Ryde, new tarmac driveway work runs at about £73–£115 per m² including VAT, so a 50 m² drive is roughly £3,650–£5,750. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Ryde

Ready for a price in Ryde? Use the guide price tool or send the form, and we'll arrange a visit.