Driveways and paths · Isle of Wight

New tarmac driveways in Newport, Isle of Wight

If you are weighing up new tarmac driveways in Newport, Isle of Wight, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

NEWPORT, ISLE OF WIGHT GUIDE£73–£115 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Newport, Isle of Wight

For Newport, Isle of Wight, we apply the South East rate, including a travel and haulage allowance because work here is by arrangement. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£73–£115 per m²
Example: 30 m² drive£2,400–£3,800
Example: 50 m² drive£3,650–£5,750
Example: 80 m² drive£5,800–£9,200

As a 2026 guide in Newport, Isle of Wight, new tarmac driveway work runs at about £73–£115 per m² including VAT, so a 50 m² drive is roughly £3,650–£5,750. Guide only; the survey confirms a fixed price.

Where we work in and around Newport, Isle of Wight

The key facts for Newport, Isle of Wight. Work in Newport, Isle of Wight is by arrangement. Hot material has further to travel, so we group jobs and tell you about any travel cost first.

Postcodes
PO30
Area
Isle of Wight
Nearest towns
Cowes (4 miles), Ryde (6 miles), Sandown (7 miles)
Pricing
South East rates plus a travel allowance (by arrangement)
Cover
By arrangement
Kerb approvals
The highway authority

Close to Newport, Isle of Wight: Cowes, Ryde, Sandown.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Newport, Isle of Wight?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Newport, Isle of Wight: common questions

Is the survey in Newport, Isle of Wight free?

Newport, Isle of Wight is covered by arrangement. We confirm any travel cost before booking the survey.

Are there planning or highway rules in Newport, Isle of Wight?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Newport, Isle of Wight property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Newport, Isle of Wight surveys alongside other jobs on the Isle of Wight, and give you dates once the specification is agreed.

Do you cover all of Newport, Isle of Wight?

We cover Newport, Isle of Wight including PO30, and nearby Cowes, Ryde, Sandown. Work here is by arrangement.

More we do in Newport, Isle of Wight

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Newport, Isle of Wight.

Free survey for new surfacing

New tarmac driveways in Newport, Isle of Wight: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price