Driveways and paths

Tarmac paths and footpaths on the Isle of Wight

From Newport, Isle of Wight to the smaller towns on the Isle of Wight, our tarmac paths quotes list the depths, edging, drainage and VAT so you can compare like with like.

ISLE OF WIGHT GUIDE£67–£109 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much does a tarmac path cost on the Isle of Wight?

Rates on the Isle of Wight follow the South East, about 21% above our UK midpoint. Work here is by arrangement because of travel and haulage.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£67–£109 per m²
Example: 10 m² path£800–£1,300
Example: 20 m² path£1,450–£2,400
Example: 40 m² path£2,650–£4,350

Towns we cover on the Isle of Wight

Postcode areas: PO.

What is included?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Rules on the Isle of Wight

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Tarmac paths and footpaths on the Isle of Wight: questions

How much does a tarmac path cost on the Isle of Wight?

As a 2026 guide, about £67–£109 per m² inc VAT on the Isle of Wight. The survey confirms a fixed price.

Which towns on the Isle of Wight do you cover?

Newport, Isle of Wight, Ryde, Cowes, Sandown, by arrangement.

How long does a tarmac path take?

Often 1–2 days.

How thick should a tarmac footpath be?

For walking traffic, about 100 mm of compacted Type 1 with a 40–50 mm binder and a 20 mm surface course is a common build. If a mower or quad will use it, go thicker.

Other services on the Isle of Wight

Free survey for new surfacing

Get a written tarmac quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price