Tarmac paths and footpaths in Welwyn Garden City

What does a tarmac path cost in Welwyn Garden City?

Guide prices below are for Welwyn Garden City, adjusted for the East of England, where surfacing rates run about 5% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£58–£94 per m²
Example: 10 m² path	£690–£1,150
Example: 20 m² path	£1,250–£2,100
Example: 40 m² path	£2,300–£3,800

As a 2026 guide in Welwyn Garden City, tarmac path work runs at about £58–£94 per m² including VAT, so a 10 m² path is roughly £690–£1,150. Guide only; the survey confirms a fixed price.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Covering Welwyn Garden City

Survey cover and pricing for Welwyn Garden City. Welwyn Garden City sits 13 miles from Watford, within our regular Hertfordshire cover.

Postcodes: AL8, AL7, AL6
Area: Hertfordshire
Nearest towns: Hatfield (3 miles), Hertford (6 miles), St Albans (6 miles), Harpenden (7 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Hatfield, Hertford, St Albans, Harpenden, Stevenage.

Planning and kerb rules for Welwyn Garden City

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Questions about tarmac paths in Welwyn Garden City

Do I need permission for a tarmac path in Welwyn Garden City?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Welwyn Garden City?

We cover Welwyn Garden City including AL8, AL7, AL6, and nearby Hatfield, Hertford, St Albans.

Is the survey in Welwyn Garden City free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a tarmac path in Welwyn Garden City?

As a 2026 guide in Welwyn Garden City, tarmac path work runs at about £58–£94 per m² including VAT, so a 10 m² path is roughly £690–£1,150. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Welwyn Garden City

Questions about tarmac paths in Welwyn Garden City? Call, WhatsApp or use the form, and we'll talk it through.