Driveways and paths · Hertfordshire

Tarmac paths and footpaths in Hertford

A good tarmac path in Hertford looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

HERTFORD GUIDE£58–£94 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Hertford?

For Hertford, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£58–£94 per m²
Example: 10 m² path£690–£1,150
Example: 20 m² path£1,250–£2,100
Example: 40 m² path£2,300–£3,800

As a 2026 guide in Hertford, tarmac path work runs at about £58–£94 per m² including VAT, so a 10 m² path is roughly £690–£1,150. Guide only; the survey confirms a fixed price.

Covering Hertford

Survey cover and pricing for Hertford. Hertford is covered on our Hertfordshire rounds, 17 miles from Watford.

Postcodes
SG13, SG14
Area
Hertfordshire
Nearest towns
Ware (2 miles), Hoddesdon (4 miles), Welwyn Garden City (6 miles), Hatfield (7 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Close to Hertford: Ware, Hoddesdon, Welwyn Garden City, Hatfield, Cheshunt.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Hertford

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Hertford: common questions

Is the survey in Hertford free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tarmac path take in Hertford?

Often 1–2 days. We book Hertford surveys alongside other jobs in Hertfordshire, and give you dates once the specification is agreed.

Do you cover all of Hertford?

We cover Hertford including SG13, SG14, and nearby Ware, Hoddesdon, Welwyn Garden City.

Do I need permission for a tarmac path in Hertford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Hertford

Ready for a price in Hertford? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Hertford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price