New tarmac driveways in Welwyn Garden City
For new tarmac driveways in Welwyn Garden City, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

What does a new tarmac driveway cost in Welwyn Garden City?
Local guide rates for Welwyn Garden City (the East of England, about 5% above our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £63–£100 per m² |
| Example: 30 m² drive | £2,100–£3,300 |
| Example: 50 m² drive | £3,150–£5,000 |
| Example: 80 m² drive | £5,050–£8,000 |
As a 2026 guide in Welwyn Garden City, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Guide only; the survey confirms a fixed price.
Do I need permission in Welwyn Garden City?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Layer by layer
What is included in a new tarmac driveway?
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Geotextile membrane where the ground is soft or clay
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Falls set so water runs to a channel, gully or soft landscaping
Covering Welwyn Garden City
The key facts for Welwyn Garden City. Welwyn Garden City is 13 miles from Watford, and we survey there as part of Hertfordshire cover.
- Postcodes
- AL8, AL7, AL6
- Area
- Hertfordshire
- Nearest towns
- Hatfield (3 miles), Hertford (6 miles), St Albans (6 miles), Harpenden (7 miles)
- Pricing
- East of England, about 5% above our UK midpoint
- Kerb approvals
- The highway authority
Close to Welwyn Garden City: Hatfield, Hertford, St Albans, Harpenden, Stevenage.
Welwyn Garden City: common questions
What approvals apply in Welwyn Garden City?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How much does a new tarmac driveway cost in Welwyn Garden City?
As a 2026 guide in Welwyn Garden City, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.
How quickly can work start in Welwyn Garden City?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Welwyn Garden City surveys alongside other jobs in Hertfordshire, and give you dates once the specification is agreed.
Do you cover all of Welwyn Garden City?
We cover Welwyn Garden City including AL8, AL7, AL6, and nearby Hatfield, Hertford, St Albans.
Also in Welwyn Garden City
- Car park surfacing
- Tarmac driveway repairs
- Permeable tarmac driveways
- Tarmac driveway resurfacing
- Red tarmac driveways
- Tarmac paths and footpaths
- Everything in Welwyn Garden City
Tell us what you have in mind for Welwyn Garden City and we'll book a survey and put the specification in writing.
New tarmac driveways in Welwyn Garden City: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED