Driveways and paths · Hertfordshire

New tarmac driveways in Hatfield

Every new tarmac driveway we price in Hatfield comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

HATFIELD GUIDE£63–£100 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Hatfield?

Local guide rates for Hatfield (the East of England, about 5% above our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£63–£100 per m²
Example: 30 m² drive£2,100–£3,300
Example: 50 m² drive£3,150–£5,000
Example: 80 m² drive£5,050–£8,000

As a 2026 guide in Hatfield, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Guide only; the survey confirms a fixed price.

Covering Hatfield

The key facts for Hatfield. We reach Hatfield on our Hertfordshire survey days; Watford is 10 miles away.

Postcodes
AL10, AL9
Area
Hertfordshire
Nearest towns
Welwyn Garden City (3 miles), St Albans (5 miles), Potters Bar (5 miles), Hertford (7 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Welwyn Garden City, St Albans, Potters Bar, Hertford, Harpenden.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Planning and kerb rules for Hatfield

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Questions about new tarmac driveways in Hatfield

Do I need permission for a new tarmac driveway in Hatfield?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Hatfield free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Hatfield?

We cover Hatfield including AL10, AL9, and nearby Welwyn Garden City, St Albans, Potters Bar.

New tarmac driveway cost in Hatfield: what should I budget?

As a 2026 guide in Hatfield, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Hatfield

Ready for a price in Hatfield? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Hatfield: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price