Tarmac paths and footpaths in Stalybridge

What does a tarmac path cost in Stalybridge?

Guide prices below are for Stalybridge, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£53–£87 per m²
Example: 10 m² path	£640–£1,050
Example: 20 m² path	£1,150–£1,900
Example: 40 m² path	£2,150–£3,500

As a 2026 guide in Stalybridge, tarmac path work runs at about £53–£87 per m² including VAT, so a 40 m² path is roughly £2,150–£3,500. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Stalybridge

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

What we do on a tarmac path

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled

Covering Stalybridge

What applies in Stalybridge. Stalybridge is covered on our Greater Manchester rounds, 7 miles from Manchester.

Postcodes: SK15, OL5
Area: Greater Manchester
Nearest towns: Dukinfield (1 mile), Ashton-under-Lyne (2 miles), Hyde (2 miles), Denton (3 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Dukinfield, Ashton-under-Lyne, Hyde, Denton, Droylsden.

Your questions answered

What approvals apply in Stalybridge?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a tarmac path take in Stalybridge?

Often 1–2 days. We book Stalybridge surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Which Stalybridge postcodes do you cover?

We cover Stalybridge including SK15, OL5, and nearby Dukinfield, Ashton-under-Lyne, Hyde.

Is the survey in Stalybridge free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Stalybridge

Ready for a price in Stalybridge? Use the guide price tool or send the form, and we'll arrange a visit.