Tarmac paths and footpaths in Denton

Tarmac path prices in Denton

Guide prices below are for Denton, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£53–£87 per m²
Example: 10 m² path	£640–£1,050
Example: 20 m² path	£1,150–£1,900
Example: 40 m² path	£2,150–£3,500

As a 2026 guide in Denton, tarmac path work runs at about £53–£87 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

Covering Denton

Survey cover and pricing for Denton. We cover Denton by grouping surveys with nearby Greater Manchester jobs; Manchester is 5 miles away.

Postcodes: M34
Area: Greater Manchester
Nearest towns: Hyde (2 miles), Dukinfield (2 miles), Droylsden (2 miles), Ashton-under-Lyne (2 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Hyde, Dukinfield, Droylsden, Ashton-under-Lyne, Bredbury.

The build-up we price

Rules that apply in Denton

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

What is included in a tarmac path?

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

Path set out to the line and width you want
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Questions about tarmac paths in Denton

What is the price of a tarmac path in Denton?

As a 2026 guide in Denton, tarmac path work runs at about £53–£87 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

Which Denton postcodes do you cover?

We cover Denton including M34, and nearby Hyde, Dukinfield, Droylsden.

What approvals apply in Denton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Denton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Denton

Tell us what you have in mind for Denton and we'll book a survey and put the specification in writing.