Tarmac driveway resurfacing in Denton

How much should I budget in Denton?

Guide prices below are for Denton, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£24–£44 per m²
Example: 30 m² drive	£800–£1,450
Example: 50 m² drive	£1,200–£2,200
Example: 80 m² drive	£1,950–£3,500

As a 2026 guide in Denton, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 30 m² drive is roughly £800–£1,450. Guide only; the survey confirms a fixed price.

Where we work in and around Denton

Denton at a glance. Smaller towns such as Denton are surveyed alongside nearby jobs in Greater Manchester.

Postcodes: M34
Area: Greater Manchester
Nearest towns: Hyde (2 miles), Dukinfield (2 miles), Droylsden (2 miles), Ashton-under-Lyne (2 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Hyde, Dukinfield, Droylsden, Ashton-under-Lyne, Bredbury.

Rules that apply in Denton

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on tarmac resurfacing

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Weed treatment and a clean surface
New surface course, typically 25–40 mm, laid hot and rolled
Edges sealed and joints to existing surfaces cut neatly

Denton: common questions

How long does tarmac resurfacing take in Denton?

Often 1–2 days for a typical drive. We book Denton surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Is the survey in Denton free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Denton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Denton?

We cover Denton including M34, and nearby Hyde, Dukinfield, Droylsden.

Also in Denton

Questions about tarmac resurfacing jobs in Denton? Call, WhatsApp or use the form, and we'll talk it through.