New tarmac driveways in Stalybridge

What does a new tarmac driveway cost in Stalybridge?

Local guide rates for Stalybridge (the North West, about 3% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Stalybridge, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

The build-up we price

Rules that apply in Stalybridge

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Where we work in and around Stalybridge

Stalybridge at a glance. Stalybridge is covered on our Greater Manchester rounds, 7 miles from Manchester.

Postcodes: SK15, OL5
Area: Greater Manchester
Nearest towns: Dukinfield (1 mile), Ashton-under-Lyne (2 miles), Hyde (2 miles), Denton (3 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Dukinfield, Ashton-under-Lyne, Hyde, Denton, Droylsden.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Stalybridge

Are there planning or highway rules in Stalybridge?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Stalybridge?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Stalybridge surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

New tarmac driveway cost in Stalybridge: what should I budget?

As a 2026 guide in Stalybridge, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Stalybridge free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Stalybridge

Questions about new tarmac driveways in Stalybridge? Call, WhatsApp or use the form, and we'll talk it through.