Driveways and paths · Derbyshire

Tarmac paths and footpaths in Buxton

Tarmac paths and footpaths in Buxton start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

BUXTON GUIDE£54–£88 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Buxton?

These Buxton guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£54–£88 per m²
Example: 10 m² path£650–£1,050
Example: 20 m² path£1,200–£1,950
Example: 40 m² path£2,150–£3,550

As a 2026 guide in Buxton, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Guide only; the survey confirms a fixed price.

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Covering Buxton

Survey cover and pricing for Buxton. Smaller towns such as Buxton are surveyed alongside nearby jobs in Derbyshire.

Postcodes
SK17
Area
Derbyshire
Nearest towns
New Mills (8 miles), Macclesfield (9 miles), Leek (12 miles), Glossop (13 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in New Mills, Macclesfield, Leek, Glossop, Dronfield.

Planning and kerb rules for Buxton

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Your questions answered

Tarmac path cost in Buxton: what should I budget?

As a 2026 guide in Buxton, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a tarmac path in Buxton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Buxton free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Buxton?

We cover Buxton including SK17, and nearby New Mills, Macclesfield, Leek.

More we do in Buxton

Ready for a price in Buxton? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Buxton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price