Tarmac paths and footpaths in New Mills

What does a tarmac path cost in New Mills?

These New Mills guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£54–£88 per m²
Example: 10 m² path	£650–£1,050
Example: 20 m² path	£1,200–£1,950
Example: 40 m² path	£2,150–£3,550

As a 2026 guide in New Mills, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Guide only; the survey confirms a fixed price.

The build-up we price

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

New Mills: the local details

New Mills at a glance. Smaller towns such as New Mills are surveyed alongside nearby jobs in Derbyshire.

Postcodes: SK22, SK23
Area: Derbyshire
Nearest towns: Hazel Grove (5 miles), Glossop (6 miles), Bredbury (6 miles), Hyde (7 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Hazel Grove, Glossop, Bredbury, Hyde, Bramhall.

Rules that apply in New Mills

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Questions about tarmac paths in New Mills

What is the price of a tarmac path in New Mills?

As a 2026 guide in New Mills, tarmac path work runs at about £54–£88 per m² including VAT, so a 40 m² path is roughly £2,150–£3,550. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my New Mills property?

Often 1–2 days. We book New Mills surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

Are there planning or highway rules in New Mills?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in New Mills?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in New Mills

Questions about tarmac paths in New Mills? Call, WhatsApp or use the form, and we'll talk it through.