Driveways and paths · Derbyshire

New tarmac driveways in Buxton

Planning a new tarmac driveway in Buxton? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

BUXTON GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Buxton?

Local guide rates for Buxton (the East Midlands, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Buxton, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Do I need permission in Buxton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Covering Buxton

The key facts for Buxton. Buxton is covered on our Derbyshire rounds, 29 miles from Derby.

Postcodes
SK17
Area
Derbyshire
Nearest towns
New Mills (8 miles), Macclesfield (9 miles), Leek (12 miles), Glossop (13 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in New Mills, Macclesfield, Leek, Glossop, Dronfield.

Questions about new tarmac driveways in Buxton

Do I need permission for a new tarmac driveway in Buxton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a new tarmac driveway cost in Buxton?

As a 2026 guide in Buxton, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Buxton?

We cover Buxton including SK17, and nearby New Mills, Macclesfield, Leek.

Is the survey in Buxton free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Buxton

Tell us what you have in mind for Buxton and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Buxton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price