Driveways and paths · Derbyshire

New tarmac driveways in Glossop

For new tarmac driveways in Glossop, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

GLOSSOP GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Glossop?

Guide prices below are for Glossop, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Glossop, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Rules that apply in Glossop

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Glossop: the local details

The key facts for Glossop. Smaller towns such as Glossop are surveyed alongside nearby jobs in Derbyshire.

Postcodes
SK13
Area
Derbyshire
Nearest towns
Stalybridge (5 miles), Hyde (5 miles), New Mills (6 miles), Dukinfield (6 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Stalybridge, Hyde, New Mills, Dukinfield, Ashton-under-Lyne.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Glossop

How quickly can work start in Glossop?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Glossop surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Glossop?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a new tarmac driveway cost in Glossop?

As a 2026 guide in Glossop, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Glossop?

We cover Glossop including SK13, and nearby Stalybridge, Hyde, New Mills.

Other work in Glossop

Ready for a price in Glossop? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Glossop: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price