Tarmac paths and footpaths in Stockton-on-Tees
For tarmac paths in Stockton-on-Tees, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

What does a tarmac path cost in Stockton-on-Tees?
For Stockton-on-Tees, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £51–£84 per m² |
| Example: 10 m² path | £610–£1,000 |
| Example: 20 m² path | £1,150–£1,850 |
| Example: 40 m² path | £2,050–£3,350 |
As a 2026 guide in Stockton-on-Tees, tarmac path work runs at about £51–£84 per m² including VAT, so a 40 m² path is roughly £2,050–£3,350. Guide only; the survey confirms a fixed price.
What the price covers
A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.
- Path set out to the line and width you want
- Excavation to about 150–180 mm with spoil removed
- MOT Type 1 base, about 100 mm, compacted
- Binder and surface course laid hot by hand and rolled
- Gentle cross-fall so water runs off to the border
Rules that apply in Stockton-on-Tees
Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.
Covering Stockton-on-Tees
The key facts for Stockton-on-Tees. Stockton-on-Tees is one of the bigger places we cover in County Durham, so survey slots come round regularly.
- Postcodes
- TS18, TS19
- Area
- County Durham
- Nearest towns
- Billingham (2 miles), Thornaby (3 miles), Middlesbrough (3 miles), Yarm (5 miles)
- Pricing
- North East, about 7% below our UK midpoint
- Kerb approvals
- The highway authority
We also cover nearby Billingham, Thornaby, Middlesbrough, Yarm, Hartlepool.
Your questions answered
How much does a tarmac path cost in Stockton-on-Tees?
As a 2026 guide in Stockton-on-Tees, tarmac path work runs at about £51–£84 per m² including VAT, so a 40 m² path is roughly £2,050–£3,350. Edging, drainage and a dropped kerb are priced separately where needed.
Is the survey in Stockton-on-Tees free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long does a tarmac path take in Stockton-on-Tees?
Often 1–2 days. We book Stockton-on-Tees surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.
Which Stockton-on-Tees postcodes do you cover?
We cover Stockton-on-Tees including TS18, TS19, and nearby Billingham, Thornaby, Middlesbrough.
More we do in Stockton-on-Tees
- Tar and chip driveways
- Permeable tarmac driveways
- Tarmac driveway repairs
- Red tarmac driveways
- Front garden to tarmac driveway
- Car park surfacing
- Everything in Stockton-on-Tees
Tell us what you have in mind for Stockton-on-Tees and we'll book a survey and put the specification in writing.
Tarmac paths and footpaths in Stockton-on-Tees: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED