Permeable tarmac driveways in Stockton-on-Tees

What does a permeable tarmac driveway cost in Stockton-on-Tees?

Local guide rates for Stockton-on-Tees (the North East, about 7% below our UK midpoint):

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£74–£116 per m²
Example: 30 m² drive	£2,450–£3,850
Example: 50 m² drive	£3,700–£5,800
Example: 80 m² drive	£5,950–£9,300

As a 2026 guide in Stockton-on-Tees, permeable tarmac driveway work runs at about £74–£116 per m² including VAT, so a 80 m² drive is roughly £5,950–£9,300. Guide only; the survey confirms a fixed price.

What is included in a permeable tarmac driveway?

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Ground check: how fast does the soil drain?
Dig out deeper than a standard drive to fit the storage layer
Geotextile separating layer on the formation
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Overflow to a soakaway or border on slow-draining ground

Rules that apply in Stockton-on-Tees

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Where we work in and around Stockton-on-Tees

Survey cover and pricing for Stockton-on-Tees. We cover Stockton-on-Tees as part of our regular County Durham rounds.

Postcodes: TS18, TS19
Area: County Durham
Nearest towns: Billingham (2 miles), Thornaby (3 miles), Middlesbrough (3 miles), Yarm (5 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Billingham, Thornaby, Middlesbrough, Yarm, Hartlepool.

Stockton-on-Tees: common questions

What approvals apply in Stockton-on-Tees?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Stockton-on-Tees?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Permeable tarmac driveway cost in Stockton-on-Tees: what should I budget?

As a 2026 guide in Stockton-on-Tees, permeable tarmac driveway work runs at about £74–£116 per m² including VAT, so a 80 m² drive is roughly £5,950–£9,300. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Stockton-on-Tees?

Usually 3–5 working days. We book Stockton-on-Tees surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.

Also in Stockton-on-Tees

Ready for a price in Stockton-on-Tees? Use the guide price tool or send the form, and we'll arrange a visit.