Permeable tarmac driveways in Middlesbrough

Permeable tarmac driveway prices in Middlesbrough

Guide prices below are for Middlesbrough, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£77–£120 per m²
Example: 30 m² drive	£2,550–£3,950
Example: 50 m² drive	£3,850–£6,000
Example: 80 m² drive	£6,150–£9,600

As a 2026 guide in Middlesbrough, permeable tarmac driveway work runs at about £77–£120 per m² including VAT, so a 30 m² drive is roughly £2,550–£3,950. Guide only; the survey confirms a fixed price.

Do I need permission in Middlesbrough?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a permeable tarmac driveway?

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Ground check: how fast does the soil drain?
Geotextile separating layer on the formation
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Overflow to a soakaway or border on slow-draining ground
Edge restraint that does not block the flow

Where we work in and around Middlesbrough

What applies in Middlesbrough. As one of the larger towns in North Yorkshire, Middlesbrough sees regular survey visits.

Postcodes: TS1, TS2, TS4, TS3, TS5, TS6, TS7
Area: North Yorkshire
Nearest towns: Billingham (2 miles), Stockton-on-Tees (3 miles), Thornaby (4 miles), Yarm (7 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Billingham, Stockton-on-Tees, Thornaby, Yarm, Redcar.

Your questions answered

Can I get a free survey in Middlesbrough?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a permeable tarmac driveway in Middlesbrough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a permeable tarmac driveway cost in Middlesbrough?

As a 2026 guide in Middlesbrough, permeable tarmac driveway work runs at about £77–£120 per m² including VAT, so a 30 m² drive is roughly £2,550–£3,950. Edging, drainage and a dropped kerb are priced separately where needed.

Which Middlesbrough postcodes do you cover?

We cover Middlesbrough including TS1, TS2, TS4, TS3, TS5, TS6, and nearby Billingham, Stockton-on-Tees, Thornaby.

Also in Middlesbrough

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Middlesbrough.