Driveways and paths · North Yorkshire

Tar and chip driveways in Middlesbrough

If you are weighing up tar and chip driveways in Middlesbrough, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

MIDDLESBROUGH GUIDE£43–£72 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Middlesbrough?

For Middlesbrough, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£72 per m²
Example: 50 m² drive£2,150–£3,600
Example: 100 m² drive£4,300–£7,200
Example: 200 m² drive£8,200–£13,700

As a 2026 guide in Middlesbrough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 200 m² drive is roughly £8,200–£13,700. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Planning and kerb rules for Middlesbrough

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Middlesbrough

The key facts for Middlesbrough. We cover Middlesbrough as part of our regular North Yorkshire rounds.

Postcodes
TS1, TS2, TS4, TS3, TS5, TS6, TS7
Area
North Yorkshire
Nearest towns
Billingham (2 miles), Stockton-on-Tees (3 miles), Thornaby (4 miles), Yarm (7 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Middlesbrough: Billingham, Stockton-on-Tees, Thornaby, Yarm, Redcar.

Questions about tar and chip driveways in Middlesbrough

Do you cover all of Middlesbrough?

We cover Middlesbrough including TS1, TS2, TS4, TS3, TS5, TS6, and nearby Billingham, Stockton-on-Tees, Thornaby.

How long does a tar and chip driveway take in Middlesbrough?

Often 1–3 days depending on base work. We book Middlesbrough surveys alongside other jobs in North Yorkshire, and give you dates once the specification is agreed.

Tar and chip driveway cost in Middlesbrough: what should I budget?

As a 2026 guide in Middlesbrough, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 200 m² drive is roughly £8,200–£13,700. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Middlesbrough free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Middlesbrough

Ready for a price in Middlesbrough? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Middlesbrough: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price