Driveways and paths · North Yorkshire

Tarmac paths and footpaths in Thornaby

Tarmac paths and footpaths in Thornaby start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

THORNABY GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Thornaby

For Thornaby, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Thornaby, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

Thornaby: the local details

What applies in Thornaby. Thornaby is covered on our North Yorkshire rounds, 41 miles from York.

Postcodes
TS17, TS8
Area
North Yorkshire
Nearest towns
Stockton-on-Tees (3 miles), Yarm (3 miles), Billingham (4 miles), Middlesbrough (4 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Stockton-on-Tees, Yarm, Billingham, Middlesbrough, Guisborough.

Rules that apply in Thornaby

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What the price covers

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Gentle cross-fall so water runs off to the border

Questions about tarmac paths in Thornaby

How much does a tarmac path cost in Thornaby?

As a 2026 guide in Thornaby, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Thornaby?

We cover Thornaby including TS17, TS8, and nearby Stockton-on-Tees, Yarm, Billingham.

Do I need permission for a tarmac path in Thornaby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Thornaby?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Thornaby

Tell us what you have in mind for Thornaby and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Thornaby: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price